Kmc skitch 18 full#
Kmc skitch 18 pro#

Wheel Stance with pictures: Trucks&make=Toyota&type=Pickup Trucks&drive=4x4&make=Toyota&type=Pickup Trucks Good site to see differences between two wheels: There are Tundra owners running this size, but trimming is required (it’s a tight fit). 20″ rims: 305/60 R20 – 1.2 inches wider and 2.4″ taller than factory.Replacing the stock wheels with after-market 18′s that have less backspacing is recommended. There are Tundra owners running this size, but trimming is required. 18″ rims: 305/70 R18 – 1.2 inches wider and 2.8″ taller than factory.20″ rims: 285/60 R20 – 4/10ths wider and 1.5 inches taller than factory.Trimming is probably needed due to width. 18″ rims: 295/65 R18 – 1 inch taller, 8/10ths wider than factory.18″ rims: 285/70 R18 – 4/10ths wider and 1.7 inches taller than factory.

18″ rims: 275/70 R18 – One inch taller but same width as factory.

20″ rims: 275/60 R20 – one inch taller but same width as factory.

Kmc skitch 18 full#

This width may be problematic in tight turns and/or at full suspension compression.

17″ rims: 285/70 R17 – slightly more than 2″ taller than factory, this tire is 8/10ths wider than factory as well.

16″ rims: 265/80 R16 – an oddball size, this tire is the same width as the factory but more than 2″ taller.

16″ rims: 285/75 R16 – slightly more than 2″ taller than factory, this tire is 8/10ths wider than factory as well.

However, the wider the tire, the greater the likelihood of trimming. With a 3″ lift kit, the options continue to get better.

17″ rims: 275/70 R17 – 1.5 inches taller and 4/10ths wider than factory.

16″ rims: 265/75 R16 – one inch taller but same width as factory.

It may require some trimming though, but it is possible. When installing a leveling kit, you might be able to fit some wider tires than what we have listed.

17″ rims: 275/65 R17 – 4/10ths wider, half-inch taller than largest factory tire size.

17″ rims: 265/70 R17 – one inch taller but same width as factory.

16″ rims: 275/70 R16 – 4/10ths wider, half-inch taller than largest factory tire size.

Using an upgraded rim with different backspacing will allow you to increase to a wider tire. Note: These recommendations are based on the factory wheels.

275/65/18 (available on SR5, standard on limited, TRD).

255/70/18 (standard on tundra grade and sr5).

split 5-spoke machine-finished alloy wheels

Kmc skitch 18 pro#

5-spoke TRD Pro alloy wheels - Offset: +60mm

5-spoke TRD Off-Road Package alloy wheels

20' wheels - Width: 8', Offset: +60mm, Backspacing: 6.85', Hub Bore Diameter = 110mm.

18' wheels - Width: 8', Offset: +60mm, Backspacing: 6.85', Hub Bore Diameter = 110mm.

17' wheels - Width: 8', Offset: +50mm, Backspacing: 6.5', Hub Bore Diameter = 110mm.

17' wheels - Width: 7.5', Offset: +18mm, Backspacing: 5', Hub Bore Diameter = 106mm.

16' wheels - Width: 7', Offset: +15mm, Backspacing: 4.5', Hub Bore Diameter = 106mm.

Please let me know if you see missing or incorrect information in the OP and I will get it changed.Ģ003 - 2006: 6 lug 5.5 inch or 139.7mm Medium OffsetĢ007 - Present: 5 lug 150mm High Positive OffsetĬENTER BORE (size of the hole in the center of the wheel):Ģ007-Present: Aluminum = 97 ft-lbs, Steel = 154 ft-lbs I will post wheel and tire picture combinations that I can find in the OP to help out as well. Provide all the info you know such as manufacturer, model, size, offset, backspacing. Please post up pictures of your wheel and tire setups. Help those that are looking for wheels and tires to find the right setup.Show off your awesome wheel and tire setups on your Tundra.I wanted to start a thread that will serve two purposes: